Putz
Committee Member 
Luke
Posts: 1,123
|
Post by Putz on Feb 9, 2011 19:13:32 GMT -8
Well my bike is ready for the season. Just a couple sprays from a rattle can and a few engine mods later. Yes I am aware my garage is a mess.  |
|
|
|
Post by Justin(o) on Feb 9, 2011 19:18:48 GMT -8
nice sticker. You need more!!!!
|
|
Putz
Committee Member
Luke
Posts: 1,123
|
Post by Putz on Feb 9, 2011 19:24:47 GMT -8
I have 4theriders, 2WCP and SBK775. I am wait for the others.
|
|
|
|
Post by Gangplank on Feb 9, 2011 19:33:01 GMT -8
Soon young grasshopper. Soon.
Bike looks great!
|
|
dub
Committee Member
Wiles
Posts: 809
|
Post by dub on Feb 10, 2011 0:34:54 GMT -8
Can I borrow your front stand? I need to pull my forks and have the seals replaced. I'll trade you my fork stand temporarily if you need it to keep the front in the air.
|
|
|
|
Post by jlavallee on Feb 10, 2011 5:50:39 GMT -8
Nice, that should be a big step up from the CBR
|
|
|
|
Post by 1trackmind on Feb 10, 2011 6:24:02 GMT -8
Cool Ride Luke! Hey that's a catchy! I see you have a heater in your garage, can I borrow that?.......LOL..
I won't even try to keep up with that package (I mean bike&rider)...
|
|
|
|
Post by Dale on Feb 10, 2011 6:58:06 GMT -8
Nice Luke!
|
|
|
|
Post by zipbyu on Feb 10, 2011 7:43:18 GMT -8
Cool Ride Luke! Hey that's a catchy! I see you have a heater in your garage, can I borrow that?.......LOL.. I won't even try to keep up with that package (I mean bike&rider)... Putz, I told you the pool table will become a work bench. ;D ;D |
|
|
|
Post by zipbyu on Feb 10, 2011 7:43:58 GMT -8
Looks good, lets ride.
|
|
Putz
Committee Member
Luke
Posts: 1,123
|
Post by Putz on Feb 10, 2011 10:15:27 GMT -8
Yeah, well I needed the room to work on the bikes during the off season. I will put it back when I am done.
Yes Dub, you can borrow the stand any time you want. Just let me know. PS my home made EXUP motor elim works great.
|
|
|
|
Post by Justin(o) on Feb 10, 2011 10:34:11 GMT -8
home made EXUP motor elim works great. what's this? |
|
Putz
Committee Member
Luke
Posts: 1,123
|
Post by Putz on Feb 10, 2011 11:00:56 GMT -8
R6's as well as other bikes have a valve in the stock exhaust that is called the EXUP valve. When you switch to a after market pipe then there is no more valve. The valve is operated by cables. Most people just remove the cable but the motor that pulls the cables is still on the bike. If you remove this motor you get an error code unless you put an emliminator circuit on the plug.
|
|
|
|
Post by 1trackmind on Feb 10, 2011 18:29:25 GMT -8
When I bought my Daytona, I upgraded to the Arrow Titanium exhaust and re-flash was included.
|
|
|
|
Post by Oneup on Feb 10, 2011 18:32:55 GMT -8
home made EXUP motor elim works great. what's this? You're honda has one. I can't think of a modern sportbike that doesn't. |
|
